> ## Documentation Index > Fetch the complete documentation index at: https://calcs.com/docs/llms.txt > Use this file to discover all available pages before exploring further. # Design the Sleepers in a Retaining Wall Sleeper Calculator > Link sleeper retaining wall calculations (AS 4678:2002) into the Retaining Wall Sleeper beam preset to design the sleepers.
AustraliaAS 4678:2002AS 2159:2009AS 4100:2020

Sleeper Retaining Wall

Run the calc
This article will provide a step-by-step guide on how to add pre-existing sleeper retaining wall calculations as load links to the retaining wall sleeper preset in beams. ## Step 1 Create a Sleeper Retaining Wall calculation. We are currently in the process of writing a help article for this module; please stay tuned for that! ## Step 2 Create a beam calculation with the retaining wall sleeper preset. For more information on how to design beams using Calcs.com, please visit [our collection of support articles.](https://app.calcs.com/docs) For example, if your sleeper is made of timber, then you'd select the Retaining Wall Sleeper preset under Timber Beam: Please note that for demonstration purposes, a timber beam has been used. However, the retaining wall sleeper preset is available for Steel Beam, Cold-Formed Steel Beam, and Rectangular Concrete Beam calculators as well. ## Step 3 In the retaining wall sleeper calculator, link the sleeper wall retaining calculation (from [Step 1](#step1)) to the distributed loads table where it says "ADD LOAD LINK HERE." [](#step1) You're all done! Loads on the sleeper beam will automatically update if the retaining wall is updated.